Down2Mob’s Jeep Gladiator Overland Camper on a Custom Flatbed

Overland, Truck Campers, Trucks, Vehicles, Video Tours

Disclosure: This post may contain affiliate links. If you purchase through one of our links, we may earn a commission at no additional cost to you.

Phil, who makes overland travel videos as Down2Mob, turned his Jeep Gladiator Rubicon into a compact go-anywhere camper. Instead of a rooftop tent, he worked with Bison Overland Campers, a small composite camper builder in Tulsa, Oklahoma, to put a custom camper on a custom flatbed in place of the Jeep’s pickup bed.

He filmed this walkthrough the day the rig rolled out of the shop for the first time, right before driving it two hours to debut at an expo in Missouri. Phil has since lived full-time in the camper, and he’s called it pretty much the smallest camper Bison has ever built.

Jeep Gladiator with its Bison Overland camper parked in a pine forest clearing, with Phil sitting beside it
Images via Down2Mob Overland/YouTube

From Van Life to a Jeep Camper

Before the Gladiator, Phil traveled in a converted Dodge he called the Dodgemahal. In his words:

In 2019, I drove 20k+ miles while living full time out of the Dodgemahal, through 3 countries, from Mexico, to the Arctic Ocean in Tuktoyaktuk, to glaciers in Alaska, filming every bit of it.

The Jeep is the opposite approach: a much smaller rig that can go nearly anywhere off-road while still giving him a hard-sided place to sleep.

Building a Custom Flatbed

The pickup bed came off first. The shop stripped the rear of the Gladiator down to the frame, cut it, and built a custom flatbed with a spare tire carrier. Phil explains in a later video that this is the only Bison camper built this way: the custom flatbed let them drop the camper floor about 8 to 10 inches lower than a standard mount, which helps keep the center of gravity down on a lifted Jeep.

Jeep Gladiator on a lift in the shop while a fabricator welds near the front wheel
Images via Down2Mob Overland/YouTube
Gladiator with its pickup bed removed, exposing the bare frame in the shop
Images via Down2Mob Overland/YouTube
Shop worker cutting the rear of the Gladiator frame to make room for the flatbed
Images via Down2Mob Overland/YouTube
Crew test-fitting the custom flatbed frame on the back of the Jeep
Images via Down2Mob Overland/YouTube
Custom flatbed with a spare tire carrier taking shape behind the Jeep cab
Images via Down2Mob Overland/YouTube
Finished flatbed on the back of the Gladiator in a parking lot
Images via Down2Mob Overland/YouTube

The Finished Composite Camper

The camper is a white composite box with black trim, a side entry door and windows, sized to sit behind the Gladiator’s cab without hanging far past the rear axle. On the day of the tour the interior was still an empty shell, ready for Phil’s build-out. That’s how Bison typically works: it builds shells and lets owners or partner shops handle interiors.

Gladiator and its new camper parked outside the Bison Overland shop
Images via Down2Mob Overland/YouTube
Side view of the Jeep Gladiator with the finished camper on a lawn
Images via Down2Mob Overland/YouTube

Phil opening the side entry door of the composite camper on the back of his Jeep Gladiator

Video still: Down2Mob Overland/YouTube

Phil showing the bare interior of the camper shell through the open side door, with a rear window and floor hatch

Video still: Down2Mob Overland/YouTube

Power and Storage

A REDARC vehicle management system handles charging and power distribution, and gear rides in the back of the Gladiator’s cab, which works as extra storage when you travel solo.

Rear doors of the Jeep Gladiator open to show gear stored in the back of the cab

Video still: Down2Mob Overland/YouTube

REDARC vehicle management system and fuse box wired into the camper's electrical setup

Video still: Down2Mob Overland/YouTube

Jeep Gladiator and camper driving across a gravel lot
Images via Down2Mob Overland/YouTube
Jeep Gladiator and camper driving down a tree-lined driveway
Images via Down2Mob Overland/YouTube
Front view of the Jeep Gladiator Rubicon and its camper in a pine forest
Images via Down2Mob Overland/YouTube

Video Tour

Video: Down2Mob Overland on YouTube.

What It Costs

  • For comparison, Bison Overland lists its composite slide-in camper shells at $18,500 (midsize), $19,500 (full-size short bed) and $20,500 (full-size long bed), with custom sizes available. Shell pricing includes the shell and entry door; windows and other options are extra (checked October 24, 2026).
  • Bison focuses on shells; for interiors it points buyers to dealers and builders.

Highlights

  • Jeep Gladiator Rubicon with its bed replaced by a custom flatbed
  • Composite camper built by Bison Overland in Tulsa, Oklahoma
  • Floor dropped about 8 to 10 inches for a lower center of gravity
  • REDARC power management system
  • Built for full-time overland travel

Learn More

Explore More

Would you trade a van for a small Jeep camper that can go anywhere? Tell us in the comments.


If you enjoyed this you’ll LOVE our Free Daily Tiny House Newsletter with even more!
You can also join our Small House Newsletter!
Also, try our Tiny Houses For Sale Newsletter! Thank you!
More Like This: Truck Campers | Overland | Vehicles | Video Tours

Disclosure: This post may contain affiliate links. If you purchase through one of our links, we may earn a commission at no additional cost to you.

The following two tabs change content below.

Alex

Alex Pino is the founder of Tiny House Talk, a leading resource on tiny homes and simple living since 2009. He helps readers discover unique homes, connect with builders, and explore alternative living.

Join the Conversation

No comments yet. Be the first to join the conversation.

Join the Conversation

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Keep Exploring

Save to list